|
|
| Fiberglass weaving fabric(2) |
| |
Style |
Yarns/Inch
(warp x fill) |
Warp Yarn |
Fill Yarn |
Thickness
(inches) |
Weight
(OSY) |
92TC |
16 x 28 |
ECG 37 1/2 |
ECG 37 1/0 |
0.014 |
9.8 |
75TC |
16 x 24 |
ECG 37 1/2 |
ECG 150 1/2 |
.011" |
7.5 |
64TC |
18 x 34 |
ECG 75 1/3 |
ECG 50 1/0 |
.012" |
8.7 |
33TC |
18 x 36 |
ECG 75 1/2 |
ECG 75 1/0 |
.007" |
6.0 |
28TC |
42 x 64 |
ECG 75 1/0 |
ECG 150 1/0 |
.007" |
5.8 |
|
All tape styles are plain weave fabrics with woven selvages and are available with a silane finish or untreated (greige).
Packaging/Put-Up - 50 yd Rolls
|
Widths Available |
1" |
11/2" |
2" |
3" |
4" |
6" |
8" |
9" |
10" |
12" |
Rolls/Case
(Sold in-case lots only) |
48 |
32 |
24 |
16 |
12 |
8 |
4 |
4 |
4 |
4 |
|
| *Values shown are based on typical greige fabric data and should be used only as a guide, not a specification |
Style |
Finish |
Weave Pattern |
Yarn Description |
Count(in)
Ends X Picks
|
Weight |
Roll Length |
warp |
fill |
28TC |
Untreated |
Plain |
ECG 75 1/0 |
ECG 150 1/0 |
42 X 64 |
5.20 - 6.40 oz / yd2 |
50 yd |
33TC |
Untreated |
Plain |
ECG 75 1/2 |
ECG 75 1/0 |
18 X 36 |
5.40 - 6.60 oz / yd2 |
50 yd |
64TC |
Untreated |
Plain |
ECG 75 1/3 |
ECG 50 1/0 |
18 X 34 |
7.80 - 9.60 oz / yd2 |
50 yd |
75TC |
Untreated |
Plain |
ECG 37 1/2 |
ECG 150 1/2 |
16 X 24 |
6.80 - 8.30 oz / yd2 |
50 yd |
92TC |
Untreated |
Plain |
ECG 37 1/2 |
ECG 37 1/0 |
16 X 28 |
8.80 - 10.80 oz / yd2 |
50 yd |
92TC |
Untreated |
Plain |
ECG 37 1/2 |
ECG 37 1/0 |
16 X 28 |
8.80 - 10.80 oz / yd2 |
50 yd |
|
Advanced Composites
Glass Fabrics |
 |
Aircraft interior utilizing high performance fabrics
XIUJUN's high strength E glass and S glass fabrics are used in a multitude of high performance composite and reinforcement applications. E-glass and S-glass fabrics for composites applications utilize a heavier construction with complex weave patterns to produce a very high strength, high performance , lower cost fabric than carbon or Kevlar.
Applications:
Structural aircraft parts and interiors, radomes, helicopter rotor blades, tooling.
Characteristics:
High tensile strength, Dimensional stability, High heat resistance, Fire resistant, Good thermal conductivity, Good chemical resistance, Outstanding electrical properties, Durable, Economical
Configurations:
500 yard roll lengths
Standard widths: 38", 50"
Finishes: 497A, 504, 538, 550, 558, 644 (link to finish descriptions)
Specifications:
MIL-Y-1140 This specification covers the basic forms of untreated glass fiber used by themselves or as components of other materials. The materials are generally used as electrical insulation, mechanical support, or as structural members.
MIL-C-9084 This specification covers the requirements for glass fabrics that have been woven, cleaned, and finished for further fabrication into the glass fabric base resin laminates and sandwich materials.
BMS 9-3This specification covers the requirements for woven glass fabric reinforcements used by The Boeing Company and Boeing subcontractors, and supplied to The Boeing Company and Boeing subcontractors by raw material material suppliers for structural and nonstructural laminated products. This specification requires qualified products.
LOCKHEED FMS-3015BThis specification establishes the minimum requirements for woven glass cloth that has been suitably finished for fabrication into an epoxy laminate.
LOCKHEED 5PTMGG15 This specification establishes the requirements for miscellaneous styles of glass fabric, glass yarn, and glass woven tapes.
AMS 3824 This specification covers E-glass in the form of woven cloth primarily as a reinforcing material for structural plastic laminates with finishes suitable for use with various resin matrices. |
Style |
Finish |
Weave Pattern |
Yarn Description |
Count(in)
Ends X Picks |
Weight |
Breaking Strength |
Thickness
(in) |
Roll Length |
warp |
fill |
warp(lb / in) |
fill(lb / in) |
120 |
497A |
4 HS |
ECD 450 1/2 |
ECD 450 1/2 |
60 X 58 |
3.12 oz / yd2 |
105 |
87 |
0.0046 |
500 yd |
1557 |
Finished |
4 HS |
ECG 150 1/2 |
ECD 450 1/2 |
57 X 30 |
5.42 oz / yd2 |
245 |
42 |
0.0055 |
500 yd |
1581 |
497A |
8 HS |
ECG 150 1/2 |
ECG 150 1/2 |
57 X 54 |
8.75 oz / yd2 |
198 |
175 |
0.0099 |
500 yd |
1583 |
558 |
8 HS |
ECG 75 1/2 |
ECG 75 1/2 |
54 X 48 |
16.54 oz / yd2 |
333 |
300 |
0.0179 |
500 yd |
1584 |
515 |
8 HS |
ECG 150 4/2 |
ECG 150 4/2 |
44 X 35 |
26.50 oz / yd2 |
532 |
572 |
0.0265 |
500 yd |
1588 |
515 |
12 HS |
ECG 150 4/4 |
ECG 150 4/4 |
42 X 36 |
51.80 oz / yd2 |
1330 |
945 |
0.0500 |
500 yd |
1671 |
Finished |
8 HS |
ECDE 150 1/0 |
ECDE 150 1/0 |
72 X 70 |
6.00 oz / yd2 |
192 |
160 |
0.0060 |
500 yd |
1874 |
645 |
8 HS |
ECK 18 1/0 |
ECG 37 1/2 |
43 X 35 |
25.70 oz / yd2 |
638 |
690 |
0.0292 |
300 yd |
1884 |
645 |
8 HS |
ECK 18 1/0 |
ECK 18 1/0 |
44 X 35 |
25.40 oz / yd2 |
665 |
560 |
0.0260 |
300 yd |
2220 |
497A |
4 HS |
ECE 225 1/0 |
ECE 225 1/0 |
60 X 58 |
3.04 oz / yd2 |
78 |
67 |
0.0038 |
500 yd |
2500 |
538 |
1 Pick Leno |
ECH 25 1/0 |
ECG 75 2/3 |
16 X 8 |
7.78 oz / yd2 |
100 |
182 |
0.0178 |
500 yd |
2500 |
608A |
1 Pick Leno |
ECH 25 1/0 |
ECG 75 2/3 |
16 X 8 |
7.78 oz / yd2 |
100 |
182 |
0.0178 |
500 yd |
3784 |
499D |
8 HS |
ECG 37 1/2 |
ECG 37 1/2 |
42 X 36 |
25.10 oz / yd2 |
489 |
456 |
0.0274 |
500 yd |
3788 |
515 |
12 HS |
ECG 37 1/4 |
ECG 37 1/4 |
42 X 35 |
52.10 oz / yd2 |
1043 |
859 |
0.0455 |
170 yd |
3884 |
Untreated |
8 HS |
ECDE 37 1/2 |
ECDE 37 1/2 |
43 X 35 |
25.50 oz / yd2 |
614 |
440 |
0.0260 |
245 yd |
6576 |
Finished |
8 HS |
SCG 75 1/0 |
SCG 150 1/0 |
120 X 24 |
10.50 oz / yd2 |
572 |
42 |
0.0116 |
500 yd |
6580 |
Untreated |
8 HS |
SCG 150 1/0 |
SCG 150 1/0 |
73 X 70 |
5.58 oz / yd2 |
147 |
145 |
0.0063 |
500 yd |
6581 |
770B |
8 HS |
SCG 150 1/2 |
SCG 150 1/2 |
58 X 54 |
8.85 oz / yd2 |
250 |
228 |
0.0101 |
500 yd |
6781 |
497A |
8 HS |
SCG 75 1/0 |
SCG 75 1/0 |
58 X 54 |
8.85 oz / yd2 |
221 |
235 |
0.0097 |
500 yd |
7576 |
497A |
8 HS |
ECG 75 1/0 |
ECG 150 1/0 |
120 X 24 |
10.46 oz / yd2 |
430 |
29 |
0.0106 |
500 yd |
7581 |
497A |
8 HS |
ECG 75 1/0 |
ECG 75 1/0 |
58 X 54 |
8.89 oz / yd2 |
191 |
192 |
0.0090 |
500 yd |
7648 |
497A |
4 HS |
ECG 75 1/0 |
ECG 75 1/0 |
43 X 32 |
5.93 oz / yd2 |
155 |
105 |
0.0065 |
500 yd |
7781 |
497A |
8 HS |
ECDE 75 1/0 |
ECDE 75 1/0 |
57 X 54 |
8.71 oz / yd2 |
242 |
231 |
0.0089 |
500 yd |
792 |
497A |
Plain |
ECD 900 1/0 |
ECD 900 1/0 |
66 X 38 |
0.68 oz / yd2 |
30 |
15 |
0.0013 |
500 yd |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Electronics |
 |
XIUJUN Industries produces glass fabrics for electronics applications in a wide range of fabric thicknesses and weights. Fiberglass fabric is used as a non-conductive insulator in multilayer printed circuit boards for a variety of end uses.
Characteristics
﹞High degree of dimensional stability
﹞ Excellent Insulation resistance
﹞Ability to custom finish the glass surface for chemical compatibility and bonding with any desired resin system
﹞Relatively low in cost given the high value the product offers |
| Printed Circuit Board |
 |
Applications:
Computersㄛ Modemsㄛ TelecommunicationsㄛAutomotive,Consumer products.
Configurations:
Widths: 38", 41", 44", 50", 56"Roll Lengths: 1,000 每 3,000 yards
Finishes:
﹞501 Thermal cleaning finish
﹞514 - Neutral pH
﹞516 每 Silane
﹞537 - Thermal cleaning finish
﹞602 - Modified silane
﹞642 - For epoxy resin systems
﹞643 - For epoxy resin systems, similar to 642
﹞646 - Low chloride silane finish
﹞655 - For high performance resin systems
Specifications:
IPC EG-140 - Specification for finished fabrics woven from "E" glass for printed circuit boards.
|
Style |
Finish |
Weave Pattern |
Yarn Description |
Count(in)
Ends X Picks
|
Weight |
Breaking
Strength
(lb / in) |
Thickness(in) |
Roll Length |
Warp |
fill |
101 |
643 |
Plain |
ECD 1800 1/0 |
ECD 1800 1/0 |
75 X 75 |
0.48 oz / yd2 |
N/A |
N/A |
0.0009 |
1000 yd |
104 |
643 |
Plain |
ECD 900 1/0 |
ECD 1800 1/0 |
60 X 52 |
0.55 oz / yd2 |
N/A |
N/A |
0.0011 |
1250 yd |
104 |
Untreated |
Plain |
ECD 900 1/0 |
ECD 1800 1/0 |
60 X 52 |
0.57 oz / yd2 |
45 |
15 |
0.0012 |
1250 yd |
106 |
643 |
Plain |
ECD 900 1/0 |
ECD 900 1/0 |
56 X 56 |
0.72 oz / yd2 |
N/A |
N/A |
0.0013 |
2000 yd |
106 |
Untreated |
Plain |
ECD 900 1/0 |
ECD 900 1/0 |
56 X 56 |
0.73 oz / yd2 |
45 |
40 |
0.0014 |
1200 yd |
108 |
550 |
Plain |
ECD 900 1/2 |
ECD 900 1/2 |
60 X 47 |
1.40 oz / yd2 |
N/A |
N/A |
0.0024 |
1500 yd |
108 |
Untreated |
Plain |
ECD 900 1/2 |
ECD 900 1/2 |
60 X 47 |
1.40 oz / yd2 |
70 |
40 |
0.0024 |
1250 yd |
1080 |
643 |
Plain |
ECD 450 1/0 |
ECD 450 1/0 |
60 X 47 |
1.38 oz / yd2 |
N/A |
N/A |
0.0021 |
2000 yd |
1500 |
Untreated |
N/A |
ECE 110 1/0 |
ECE 110 1/0 |
50 X 42 |
4.85 oz / yd2 |
N/A |
N/A |
N/A |
1000 yd |
1504 |
Untreated |
Leno |
ECG 150 3/2 |
ECG 150 4/3 |
20 X 10 |
9.90 oz / yd2 |
N/A |
N/A |
N/A |
1000 yd |
1652 |
643 |
Plain |
ECDE 150 1/0 |
ECDE 150 1/0 |
52 X 52 |
4.06 oz / yd2 |
N/A |
N/A |
0.0045 |
1250 yd |
1652 |
Untreated |
Plain |
ECG 150 1/0 |
ECG 150 1/0 |
52 X 52 |
N/A |
175 |
175 |
0.0045 |
1250 yd |
1675 |
643 |
Plain |
ECDE 150 1/0 |
ECDE 150 1/0 |
40 X 32 |
2.84 oz / yd2 |
N/A |
N/A |
0.0040 |
1250 yd |
1675 |
Untreated |
Plain |
ECDE 150 1/0 |
ECDE 150 1/0 |
40 X 32 |
2.90 oz / yd2 |
140 |
110 |
0.0039 |
1250 yd |
2112 |
643 |
Plain |
ECE 225 1/0 |
ECE 225 1/0 |
40 X 39 |
2.04 oz / yd2 |
N/A |
N/A |
0.0032 |
1000 yd |
2112 |
Untreated |
Plain |
ECE 225 1/0 |
ECE 225 1/0 |
40 X 39 |
2.11 oz / yd2 |
90 |
80 |
0.0032 |
1000 yd |
2113 |
643 |
Plain |
ECE 225 1/0 |
ECD 450 1/0 |
60 X 56 |
2.30 oz / yd2 |
N/A |
N/A |
0.0031 |
1000 yd |
2113 |
Untreated |
Plain |
ECE 225 1/0 |
ECD 450 1/0 |
60 X 56 |
2.34 oz / yd2 |
195 |
80 |
0.0031 |
1000 yd |
2116 |
643 |
Plain |
ECE 225 1/0 |
ECE 225 1/0 |
60 X 58 |
3.06 oz / yd2 |
N/A |
N/A |
0.0037 |
1000 yd |
2116 |
Untreated |
Plain |
ECE 225 1/0 |
ECE 225 1/0 |
60 X 58 |
3.13 oz / yd2 |
195 |
120 |
0.0037 |
1000 yd |
2125 |
643 |
Plain |
ECE 225 1/0 |
ECG 150 1/0 |
40 X 39 |
2.54 oz / yd2 |
N/A |
N/A |
0.0036 |
1000 yd |
2125 |
Untreated |
Plain |
ECE 225 1/0 |
ECG 150 1/0 |
40 X 39 |
2.59 oz / yd2 |
100 |
130 |
0.0036 |
1000 yd |
2157 |
Untreated |
Plain |
ECE 225 1/0 |
ECG 75 1/0 |
60 X 36 |
4.35 oz / yd2 |
N/A |
N/A |
N/A |
1000 yd |
2165 |
643 |
Plain |
ECE 225 1/0 |
ECG 150 1/0 |
60 X 52 |
3.55 oz / yd2 |
N/A |
N/A |
0.0040 |
1000 yd |
2165 |
Untreated |
Plain |
ECE 225 1/0 |
ECG 150 1/0 |
60 X 52 |
3.79 oz / yd2 |
120 |
155 |
0.0042 |
1000 yd |
2313 |
643 |
Plain |
ECE 225 1/0 |
ECD 450 1/0 |
60 X 64 |
2.40 oz / yd2 |
N/A |
N/A |
0.0033 |
1000 yd |
2313 |
Untreated |
Plain |
ECE 225 1/0 |
ECD 450 1/0 |
60 X 64 |
2.47 oz / yd2 |
195 |
60 |
0.0030 |
1000 yd |
3313 |
643 |
Plain |
ECDE 300 1/0 |
ECDE 300 1/0 |
60 X 62 |
2.40 oz / yd2 |
N/A |
N/A |
0.0033 |
1000 yd |
3313 |
Untreated |
Plain |
ECDE 300 1/0 |
ECDE 300 1/0 |
60 X 62 |
2.38 oz / yd2 |
N/A |
N/A |
0.0033 |
1000 yd |
3323 |
Untreated |
Plain |
ECDE 300 1/0 |
ECE 225 1/0 |
60 X 47 |
2.50 oz / yd2 |
N/A |
N/A |
N/A |
1000 yd |
7624 |
643 |
Plain |
ECG 75 1/0 |
ECG 75 1/0 |
44 X 24 |
5.42 oz / yd2 |
N/A |
N/A |
0.0066 |
1500 yd |
7624 |
Untreated |
Plain |
ECG 75 1/0 |
ECG 75 1/0 |
44 X 24 |
5.43 oz / yd2 |
240 |
130 |
0.0068 |
1500 yd |
7628 |
643 |
Plain |
ECG 75 1/0 |
ECG 75 1/0 |
44 X 31 |
6.00 oz / yd2 |
N/A |
N/A |
0.0068 |
3000 yd |
7628 |
Untreated |
Plain |
ECG 75 1/0 |
ECG 75 1/0 |
44 X 31 |
6.17 oz / yd2 |
250 |
200 |
0.0071 |
3000 yd |
7629 |
643 |
Plain |
ECG 75 1/0 |
ECG 75 1/0 |
44 X 34 |
6.19 oz / yd2 |
N/A |
N/A |
0.0071 |
3000 yd |
7629 |
Untreated |
Plain |
ECG 75 1/0 |
ECG 75 1/0 |
44 X 34 |
6.19 oz / yd2 |
250 |
200 |
0.0076 |
3000 yd |
7635 |
643 |
Plain |
ECG 75 1/0 |
ECG 50 1/0 |
44 X 29 |
6.85 oz / yd2 |
N/A |
N/A |
0.0079 |
3000 yd |
7635 |
Untreated |
Plain |
ECG 75 1/0 |
ECG 50 1/0 |
44 X 29 |
7.10 oz / yd2 |
250 |
220 |
0.0083 |
3000 yd |
7642 |
643 |
Plain |
ECG 75 1/0 |
ECG 37 1/0T |
44 X 20 |
6.72 oz / yd2 |
N/A |
N/A |
0.0100 |
2200 yd |
7642 |
Untreated |
Plain |
ECG 75 1/0 |
ECG 37 1/0T |
44 X 20 |
6.86 oz / yd2 |
250 |
110 |
0.0110 |
2200 yd |
|
Values shown are based on typical greige and finish fabric data
and should be used only as a guide, not a specification. . |
| Electrical Insulation |
 Electrical tape utilizing woven fiberglass substrate |
Applications:
Electrical tapes for motor windings, varnished sheets and tapes, mica backing
Onfigurations:
Widths: 38", 41", 44", 50", 56"ㄛRoll Lengths: 1,000 每 3,000 yards
Finishes:517 每 Heat cleaned finish
|
| |
| 奻珨珜 狟珨珜 |
|
 |
|
