C-FH MAT (Flooring mat)
C-FH mat is mainly used as substrates for plastic flooring and wall covering materials. It features in uniform thickness, dimensional stabillty, non-distortion under increased temperature, resistant against mildew and easy impregnation with resin coating. The PVC cusgion and vinyl flooring made from this substrate is an ideal decorative material for floor decoration in domestic residences on account of their characteristics such as smooth appearance, non-shrinkage, non-deformation, bright colour, convenient lay-up and renovation. By further processing. this mat can be manufactured into a variety of colourful facing materials to be used in the internal decoration in elegant hotels.
C-DH MAT (Roofing mat )
C-DH mat is mainly used as substrates for water-proof roofing materials. It is characterized by high tensile strength, corrosion resistance, dimensional stability, water resistance, high peoosity and easy satyration by bitumen. The longitudinal strength and tear resistance can be imptoved further by incorporating reinforcements into the mat across its whole width. Perforated mat is also available when the mat comes out from a particular punch process. The asphalt roll roofing ssubstrated with C-DH mat can overcome peoblems existing with paper felt such as low-temperature cracking, high-temperature melting, liable to aging, rotting and leaking. Other advantages with C-DH mat substrated roofing are high strength, execllent uniformity, good weathering performance, leaking resistance, simplified process and longer life time. C-DH mat is an ideal substrate material for asphalt roofing rolls and shingles. C-DH mat can also act as the lining for roof insulation layers to protect polymer foam insulation from the damaging effect caused by chemical solvents in bitumen so as to prolong the lifetime of heat insulation layer.
C-PM MAT (Pipe wrap mat)
C-PM mat is used as base material for anti-corrosion wrapping on steel pipelines that buried undergroud for oil or gas transportation. It is characterized by high tensile strength, good flexibility, uniform thickness, solvent resistance, moisture resistance, non-rotting and flame retardation. It is well compatible with impregnating bitumen or coal tar enamel acquire excellent capabilities against leakage and aggressine media in the environment so that the cost for maintenance and replacement can be minimized significantly and the life time of pipeline may be prolonged up to 50-60 years. Authoritative tests have proven that the property data of mats in C-PM series can all meet or surpass the technical specification stated in SY/T0079, the Oil and Gas Industry Stardard of the People’s Republlic of China, and meet the requirement is the specification of AWWA C-203 as well. This mat is an ideal base material as inner wrap or outer wrap impregnated by bitumen or coal tar enamel.
C-S & BMT MAT (FRP surfacing mat )
C-S & BMT mat is mainly used in the surface layers of FRP products. It is characterized by uniform fiber dispersion, smooth surface, soft hand-feeling, low binder content, fast resin impregnation and good mould obedience. This line of product falls into two categories: wrap type C-Sxx30 series and hand lay-up BMT series. The wrap type FRP surfacing mat is most suitable for wrapping FRP pipes and vessels because it is capable of significantly improving the performances of surface layer to realize longer lifetime and resistance against corrosion, leakage and compression. The hand lay-up FRP products as it is capable of covering up the texture of underlayers to create high gloss surface that gives rise to improved strength and corrosion resistance. The surfacing mats in these two categories are also applicable to other FRP moulding processes such as press moulding, spary-up, centrufugal rotating moulding, etc.
C-SAB MAT (Battery separator mat)
C-SAB mat is mainly used as substrate for lead-acid battery separator plate. It is characterized by smooth surface, uniform thickness, low DC mass resistivty, high absorption capacity, good acid resistance, low content of deoxidized KmnO4 organic substance and impurity as well as proper stiffness. The compound separator plate made of C-SAB mat with PVC or rubber coating has the advantages of separator plates possesses stronger starting power and longer lifetime so that it has become a trend to replace the traditional separator plate with this novel compound plate made of glassfiber and rubber/PVC. The peoperty data of the battery fixed up with C-SAB mat plate meet all the specifications specified on Janpanese industrial standard JIS-C2202 Glassfiber Mat for Lead –acid Storage Battery. At same time, the compoumd plate made of C-SAB mat is also in conformity with the specifications detailed in JB 3385-91, a mechanic industry standard of the People’s Republic of China.
C-PCB Mat (PCB mat)
PCB glassfiber mat is specially used as the base material in the copper-cladded laminate of type CEM-3. This type of mat is characterized by its smooth visual quality, excellent electrical feature and heat resistance. Being uniquely compatible to epoxy resin matrix, this type of mat enables the CCL product to reach the specifications set by IPC-4130 and comparable to that made ofglassfiber woven rovings. Applicable to industrial electronic devices, CCL with glassfiber mat base is well received by the market because of its processability by punching and drilling . The succesful application by the CCL producers has proven that the PCB mat developed by this company is comparable to similar in the world market in terms of physical and chemical properties and is reliable in the CCL production.
C-SH MAT (Special facing mat)
C-SH mat is mainly used as the facing material for gypsum board, mineral wool board and glass wool board and glass wool board. It featrues in dimensional stability and unifirmity, corrosion and heat resistance as well as high wet strength and strong adhesion. By replacing paper facing with glassfiber mat, a special fire-proof board thus formed becomes a non-inflammable material with its fire retardation grade rising up to Class A.This kind of special fire-proof board is light in weight, flat on top, good in edge profile. Its excellent heat temperature stability will make it perfect in combination with its unique white colour and elegant style. Characterized by bright colour and three-dimensional effect, the printed pattern board, d4eco board and perforated sound insulation deco board manufactured with C-SH mat are ideal non-inflammable deco materials for constructions or partitions and ceiling inside ships and boats where fire-retardation requirments are tighter than usual.
ROOFING GLASSFIBER MAT
Glassfiter mat
C-DH-Series, Unreinforced
C-DH-C Series, reinforced
Yarn spacing: 30mm
Area weight: 50g/m2-120/m2

ROOFING GLASSFIBER MAT
C-DH MAT (Roofing mat )
C-DH mat is mainly used as substrates for water-proof roofing materials. It is characterized by high tensile strength, corrosion resistance, dimensional stability, warter resistance , high porosity and easy stauration by bitumen. The longitudinal strengh and tear resistance can be improved further by incorporating reinforvements into the mat across its whole width. Perforated mat is also available when the mat comes out from a particular punch process. The asphalt roll roofing substrated with C-DH mat can ouercome problems exising with paper felt such as low-temperature cracking , high-temperature melting, liable to aging, rotting and leaking. Other advantages with C-DH mat substrated roofing are high strength, excellent uniformity, good weathering performance, leaking resistance, simplified process and longer life time. C-DH mat is an ideal substrate protect polymer foam insulation from the damaging effect caused by chenical solvents in bitumen so as to prolong the lifetime of heat insulation layer.
Specification

Glassfiber mat
Type: C-FH series Thickness: 0.33mm 0.40mm 0.52mm


BETTERY SEPARATOR MAT
C-SAB MAT (Battery separator mat)
C-SAB mat is mainly used as substrate for lead-acid battery separator plate. It is characterized by smooth surface, uniform thickness, low DC mass resistivty, high absorption capacity, good acid tesistance, low content of deoxidized KmnO4 organic substance and impurity as well as proper stiffness. The compound separator plate made of C-SAB mat with PVC or rubber coating has the advantahes of better machanic strength and vibration resistance, low mass resistivty, high porosity and large capacity. The battery fixed up with this type of siparator plates possesses stronger starting power and longer lifetime so that it has become a trend to replace the traditional separator plate with this novel compound plate made of glassfiber and rubber/PVC. The property data of the battery fixed up with C-SAB mat plate meet all the specifications specified in Janpanese industrial standard JIS-C2202 Glassfiber Mat for Lead-acid Storage Battey. At the same time, the compound plate made of C-SAB mat is also in conformity with the specifications detailed in JB 3385-91, a mechanic industry standard of the people’s Republic of China.
Specification:

Glassfiber mag
Type C-PM series
Area weight:50g/m2-90g/m2
Yarn spacing : 30mm

FRP SURFACING MAT
C-S& BMT MAT(FRP surfacing mat )
C-S & BMT mat is mainly used is the surface layers of FRP products. It is characterized by uniform fiber dispersion, smooth surface, soft hand-feeling, low binder content, fast tesin impregnation and good mould obedience. This line of product falls into two categories: wrap type C-Sxx30 series because it is capable of significantly improving the performances of surface layer to realize longer lifetime and resistance against corrosion, leakage and compression . The hand lay-up type FRP surfacing mat is especially suitable for mouldings with sophisticated contours while it is characterized by its good mould obedience and fast resin penatration . It is an indispensable material for high quality moulds and FRP products as it is capableof covering up the texture of underlayers to create high gloss surface that gives rise to improved strength and corrosion resistance .The surfacing mats in these two categories are also applicable to other FRP moulding processes such as press moulding, spary-up, centrufugal rotating moulding , etc.
Specification: